Black AYN License Plate Frame & Smart Module Combo from Signal Dynamics

SKU 00417
$116.95
In stock
1
Product Details
The AYN is All You Need!

AYN stands for ALL YOU NEED, and this license plate frame and smart module combination pack will give you just that! To start we designed a custom forged zinc frame with a unique sculptured design that has a super durable black powder coat finish. Adding to the superior quality of our frame, 30 ultra bright LED’s with running light and brake light capability are built in along with 12 white license plate LED illuminators to really make you and your license plate visible!
To really make this frame ALL YOU NEED we gave it functionality including brake and running lights. When wired in with the AYN smart module you will have sequential turn signals, ‘night rider’ mode for shows and hazard flashers for emergencies. And to top it off, we added our patented BackOFF technology giving you the option to choose from 4 different brake flash patterns. The “AYN” License Plate Frame is.....All You Need for your motorcycle!
We GUARANTEE these LEDs to be the brightest lights you've ever seen. If you don't agree we will take it back hassle free and reimburse your shipping costs! (You'll see, and you will agree.....They're the brightest LEDs in the world. You may even need sunglasses!)

The AYN License Plate Frame Features
  • Ultra-bright surface mount LED’s (Almost 2x brighter than other LED frames available)
  • Dual Intensity LED Brake and Running Lights
  • Built-in white LED License Plate Lighting
  • Flush mount scratch resistant lens
  • Custom forged zinc frame with a unique sculptured design
  • 4 Rear mount screws and mounting hardware included
  • Durable Black Powder Coating
  • Simple 3 wire installation – Brake, Running Light and Ground Wire
  • 12 volts DC and only draws half an amp


The “AYN Smart Module” Adds the Following Functions


4 User-selected Brake Flashing patterns to Increase conspicuity/visibility

  • Sequential flashing Turn Signals
  • Hazard Flasher mode for Emergency Situations
  • Attention drawing “Night Rider" Mode for stationary events like shows and bike nights
  • Straight forward wiring - Simple connectivity to the AYN Frame
  • The “AYN Smart Module” is designed to work with the “AYN Frame” only

How to Engage Different Brake Light Modes
The default mode that your AYN frame has is MODE A. If you would like to switch to any of the 4 braking flash patterns, simply press your hand or foot brakes the amount of times listed below ( 6x, 9x, 12x or 15x) immediately after you turn on your motorcycle. You will need to wait 10 seconds for the mode you've chosen to take effect.

Mode A - (Default)1 second rapid WIG WAG (back-forth on either side) then our patented BackOFF sequence (Three slow flashes - Steady for one second - Repeat).To engage: Press your hand or foot brake 6x immediately after you turn on your motorcycle. You will need to wait 10 seconds for this mode to take effect.
Mode B - 1 second rapid WIG WAG (back-forth on either side) then your brakes will remain steady on as long as you are stopped. To engage: Press your hand or foot brake 9x immediately after you turn on your motorcycle. You will need to wait 10 seconds for this mode to take effect.
Mode C - Steady on brakes (NO flashing) - This mode will most commonly be needed in the event that your state has a mandatory annual vehicle inspection or during group rides. To engage: Press your hand or foot brake 12x immediately after you turn on your motorcycle. You will need to wait 10 seconds for this mode to take effect.
Mode D - Continuous rapid WIG WAG (back-forth on either side) as long as you are stopped. To engage: Press your hand or foot brake 15x immediately after you turn on your motorcycle. You will need to wait 10 seconds for this mode to take effect.

How to Engage Different Functions

HAZARD MODE - Turn your right turn signal on, apply your hand or foot brakes and turn your key switch off. When the hazard mode is turned on this way it will continue to flash until your motorcycle is turned back on. This mode will not work while your motorcycle is on for safety reasons.
'NIGHT RIDER' MODE - Turn your left turn signal on, apply your hand or foot brakes and turn your key switch off. When you engage 'Night Rider' mode the LEDs will sequence continually back and forth until you turn your key switch back on. The main use for this mode is to show off your frame and bring more attention to your motorcycle during bike nights or rally's. This mode will not work while your motorcycle is on for safety reasons.
TURN SIGNALS - The frame will give you additional turn signals that sequence from the center and outward for increased visibility while changing lanes or waiting to turn.
Installation
To install, nest your license plate into your license plate frame, continue by checking to see that the 4 mounting holes all align correctly. The use of a round metal file may be necessary to ensure alignment prior to installation, if adjustment with a file is necessary minimal filing is required. It is recommended during installation not to pinch the wires against the sharp edge of your license plate, as this can cause the wire(s) to shred from vibration causing the LED light bar to lose functionality. Some license plates may need to be 'notched' for the wires to remain undamaged. The LED license plate frame has 3 wires in total. To ensure proper orientation, mount the license plate frame with the light bar on top and follow the wire color code below. If you choose to mount the plate with the LED light bar on the bottom, reverse the wire colors and connect the purple wire to your right turn signal and connect brown to your left turn signal.


Wire Colors


Black Wire: Ground Wire


Yellow Wire: Connect Yellow Wires from Frame and Module Together


Orange Wire: Connect Orange Wires from Frame and Module Together and to a 12VDC Fused Power Source


Red Wire: Brake Light Wire


Blue Wire: Switched 12V Power Source (Running Light)


Purple Wire: Left Turn Signal (test with 12V source to verify orientation)


Brown Wire: Right Turn Signal (test with 12V source to verify orientation)


White Wire: (Optional) Hazard Mode - Switch and fuse needed (sold separately)


Green Wire: (Optional) Night Rider Mode - Switch and fuse needed (sold separately)

Specifications
Part Number: 02722


Weight: 1lb


Attachment Method: Rear Mount Stud Screws


Height (in): 4 1/4"


Length (in): 7 3/16"


Width (in): 1/2"


Material: Finished Zinc


Package Contents: (1) AYN License Plate Frame, (1) AYN Smart Module, (4) Screws, Bolts, Washers


Color / Finish: Black Powder Coating


Hardware Included: Yes


Connectors Included: No


Tools Required: Wire Cutters/Splices


Waterproof: No


Water Resistant: Yes


Heat and Vibration proof: Yes


Companion Product(s): n/a
Save this product for later